New schemes are re-introducing beavers in all areas of the UK and Tornado Wire have been working with associations to ensure the animals are contained safely and securely.
To help prevent Beavers from digging underneath fencing, the RL11/100/5 C10 should be buried into the ground or turned out at ground level. Combine the RL19/180/5 C14 with RL11/100/5 C10 anti-dig skirt, to create a two-piece beaver fence. The two nets are connected with netting clips.
The net has pre-stripped ends for ease of joining. It features solid vertical wires, commonly referred to as “stiff-stay”, and the unobtrusive high pressure bonded Torus knot which does not have any sharp edges. The spring like properties of a high tensile wire help the netting stay tight, keeping maintenance to a minimum.
Specification
Number of line wires 11
Overall height 100cm
Distance between stay wires 5cm
Top & bottom line wire specification 2mm diameter – 1100 - 1250N/mm2
Intermediate line wire specification 2mm diameter – 1100 - 1250N/mm2
Vertical stay wire specification 2mm diameter – 1100 - 1250N/mm2
Approx. weight per 100m roll 90kg
Material composition Heavily galvanised steel wire
British & European Standards
BSEN 10218
BSEN 10223
BSEN 10244
Ground Contact
Zinc and zinc aluminium coated agricultural fence service life can be affected significantly when exposed to extremely acidic or saline environments and this factor should be considered when designing your fence installation. For typical service life to be achieved it is recommended that the product must be installed in an atmosphere with corrosively class C1, C2 or C3 (very low/low/medium) in accordance with ISO 9223 and must not come into contact with substances that will accelerate corrosion, including but not limited to fertilisers, pesticides, herbicides, salt water and soils of pH lower than 5.5. Particularly at sites with peaty and wet ground conditions it is recommended that you have the soil pH tested prior to designing your installation.
-