Tornado Badger Gates are specifically designed to enable badgers to pass freely through a fence, without causing any damage to the structure.
These animals tend to be very territorial in nature, often using set routes within their habitat to move from one place to the next.
If a stock or deer fence is put up across a badger run, they will either dig under the fence, or attempt to break through. In both cases this causes damage to the fence and leaves an open passage for other animals. Tornado Badger Gates completely eliminate this problem.
Tornado Badger Gates can be installed quickly and easily into existing fences, and can be locked to allow one-way only access for badgers through a fencing line.
If you want to exclude badgers from your land all together, take a look at our badger fencing.
To learn more about badger gates you can download the data sheet…
Tornado Deer Gates provide a secure entry and exit point in deer fencing, without compromising the effectiveness of the fence.
Fully-meshed and 6ft high, they are constructed from a heavy duty, box section frame, which is clad with 75mm x 75mm x 4mm welded mesh.
All Tornado Deer Gates are supplied with 20mm adjustable gate eyes and a lockable sliding bolt.
Single-leaf deer gates are available from 3ft to 16ft and pairs up to 32ft.
They can be used with 8ft 6in galvanised gateposts, or can be fixed to wooden gateposts to suit individual requirements.
To learn more about deer gates you can download the data sheet…
Tornado Field Gates are suitable for a variety of applications and environments; they range from standard to heavy seven-bar gates, to half-mesh and full-mesh.
All our field gates are supplied with 20mm adjustable gate eyes, with either a spring-loaded bolt (as standard) or a loop (to order).
Single-leaf field gates are available from 3ft to 16ft and can be hung either left- or right-handed, or can be hung as pairs up to 32ft.
Drop-over frames for gate pairs are available as simple drop-over, heavy-duty drop-over, or sliding drop-over.
Tornado’s universal Glen Gates have been designed with heavy-duty hanging and slamming stiles, as well as double-bracing which allows them to be hung on either side.
Our wooden gates have mortice and tenon joints with stainless steel bolts that are designed to avoid injury to animals. A pair of gates can be created by simply adding a throw-over loop. Drop bolts and gate fixing kits are also available to complement the range.
Tornado’s Glen Gates are supplied 1,200mm high and are available in a range of widths from 3ft to 12ft; they can be hung left- or right-handed, or as a pair.
All surfaces are planed to eliminate rough edges, and all bolts and fixings are manufactured from stainless steel.